HL steel tubular adhesive

HL steel tubular adhesive
HL steel tubular adhesive
HL steel tubular adhesive

Description

This product is packed in a 150ml twin tubular. Package contents include: Black part of adhesive(resin) A and red part of adhesive(hardener or dryer) B, spatula for picking up and mixing bowl contents, abrasive and cloth inside the box are used for cleaning the surface.

2-10 minutes Initial drying time

expire:12 months after production

Thermal Resistance: 130C⁰

Cover price :$

Pieces in each package : 30
Pieces in each carton : 360

HL steel tubular adhesive
HL steel tubular adhesive

How to use

First sand, clean and dry the place.

Mix equally two parts of adhesive by spatula which is inside the box for 3 to 6 laps and quickly rub it to the place and avoid moving parts for a least 7 minutes

For better sealing of steel glue use black part 20% more. In this case glue dries a little later but resistance will increase.

No success

1- No glue can paste Polyethylene plastic and PP

2- Moving parts during drying

Contact surface was under 〖2mm〗^2

4- Low reflex

5- Using red part more(hardener or dryer)

6- Not drying the place

7- Not cleaning former glues from surface

8- HL Glue doesn’t paste silicone layer

HL steel tubular adhesive
Social network

Product social network

More

tds-HL-car-decorative-adhesive

msds-HL-steel-glue


More

First sand, clean and dry the place.

Mix equally two parts of adhesive by spatula which is inside the box for 3 to 6 laps and quickly rub it to the place and avoid moving parts for a least 7 minutes.

For better sealing of steel glue use black part 20% more. In this case glue dries a little later but resistance will increase.

HLGLUE

HLGLUE online ordering form








Contact us

Comments

Address

IRAN

Tabriz

Next to AZARANPLASTIC

phone :+98300031616

Direct phones:+9841-36301361-7

Email : info@HLGLUE.com

© 2018 HLGLUE. All Rights Reserved | Developed by HLGLUE Programming Team