HL Turbo thermal silicone gasket maker, is protector of human’s health and is safe for car’s sensor. This adhesive is low-odor, its PH is neutral and is safe for human’s skin. It is resistant against oil, water and anti-freeze after drying. It is safe for sensor and its Thermal resistance is 350 C⁰ HL Turbo thermal gasket maker adhesive advantages: *non-corrosive *safe for human’s health *non-acidic *low-odor
Initial drying time: 10-20minutes
Expire: 10 months after production
thermal resistance:350 C⁰
Cover price :$
Clean all the surfaces and remove previous gasket maker adhesives and prepare flange surfaces. Also dry the surfaces fully in a way that there won’t be any grease and oil.
Apply a continuous, uniform line with a thickness of 1 to 4 mm from the adhesive around one of the surfaces, so that it completely surrounds the screw hole.
Wait for 20 minutes so that silicone will be dry. Then, re-insert the pieces. Silicone will dry within 1 hour but let it pass 24 hours until it is completely dry and stick.
Buying products via HL glue marketers across the country
Ordering product via “ordering product form” at the bottom of the page
(Direct ordering) Ordering via factory direct phones
IRAN
Tabriz
Next to AZARANPLASTIC
phone :+98300031616
Direct phones:+9841-36301361-7
Email : info@HLGLUE.com
© 2018 HLGLUE. All Rights Reserved | Developed by HLGLUE Programming Team